Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

debug ipv6 mld_host

Enable the collection of debug information for MLD host transactions.

Syntax

[no] debug ipv6 mld_host [ int-count | interface type] [slot/port-range]

To discontinue collection of debug information for the MLD host transactions, use the no debug ipv6 mld_host command.

Parameters

int-count

Enter the keyword count to indicate the number of required debug messages.

interface type

Enter the following keywords and slot/port information:

For a 10G Ethernet interface, enter the keyword tengigabitethernet then the slot/port information.
For a management interface, enter the keyword managementinterface then the slot/port information.
For a port-channel interface, enter the keywords port-channel then the slot/port information.
For a VLAN interface, enter the keyword vlan then the slot/port information.

Default

Disabled

Command Modes

EXEC

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2.(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To debug the MLD protocol for all ports or for specified ports, use the debug ipv6 mld_host command. Displayed information includes when a query is received, when a report is sent, when a mcast joins or leaves a group, and some reasons why an MLD query is rejected.