Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear counters vrrp ipv6

Clear the counters recorded for IPv6 VRRP groups.

Syntax

clear counters vrrp ipv6 [ vrid | vrf instance]

Parameters

vrid	(OPTIONAL) Enter the number of an IPv6 VRRP group. The range is from 1 to 255.
vrf instance	(OPTIONAL) Enter the name of a VRF instance (32 characters maximum) to clear the counters of all IPv6 VRRP groups in the specified VRF.

Defaults

Not configured

Command Modes

INTERFACE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

NOTE: This command also enables you to clear the port configurations corresponding to a range of ports.

You can specify multiple ports as slot/port-range. For example, if you want to clear the port configurations corresponding to all ports between 1 and 4, specify the port range as clear counters interfaces interface-type 1/1 - 4.