Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show link-bundle-distribution port-channel

Display the traffic-handling and utilization of the member interfaces of the port channel.

Syntax

show link-bundle-distribution port-channel

Command Modes

EXEC

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.

Usage Information

The following table describes the output fields of this show command:

Field	Description
Link-bundle trigger threshold	Threshold value that is the checkpoint, exceeding which the link bundle is marked as being overutilized and alarm is generated
LAG bundle number	Number of the LAG bundle
Utilization (In Percent)	Traffic usage in percentage of the packets processed by the port channel
Alarm State	Indicates whether an alarm is generated if overutilization of the port channel occurred. Possible values are Active and Inactive
Interface	Slot and port number, and the type of the member interface of the port channel
Line Protocol	Indicates whether the interface is administratively up or down
Utilization (In Percent)	Traffic usage in percentage of the packets processed by the particular member interface

Example

Dell#show link-bundle-distribution port-channel
                                             Link-bundle trigger threshold - 60
                                             
                                             LAG bundle - 1      Utilization[In Percent] - 0      Alarm State - Inactive
                                             
                                             Interface                Line Protocol   Utilization[In Percent]
                                             Te 0/5                   Up              0