Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

fc alias

Create a zone alias name.

Syntax

fc alias ZoneAliasName member name

To delete a zone alias name, use the no fc zone ZoneAliasName command.

Parameters

ZoneAliasName member name

Enter the zone alias name.

Enter the WWPN, port ID, or domain/port.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.7(0.0)	Introduced on the MXL and IOA.
9.1(1.0)	Introduced on the S5000.

Example

Dell(conf)#fc alias test12
                                             Dell(conf-fc-alias-test12)#?
                                             end                     Exit from configuration mode            
                                             exit                    Exit from Alias config mode             
                                             member                  Add Alias member                        
                                             no                      Negate a command or set its defaults    
                                             show                    Show alias profile configuration        
                                             Dell(conf-fc-alias-test12)#member ?
                                             WORD                    WWN(00:00:00:00:00:00:00:00), or portID(123000)

Related Commands

show fc alias — displays the configured alias.