Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show io-aggregator broadcast storm-control status

Shows if storm control is enabled or disabled. If enabled, displays information on the rate limit value.

Syntax

show io-aggregator broadcast storm-control status

Command Modes

EXEC Privilege

Supported Modes

Standalone-Mux (SMUX)

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell#show io-aggregator broadcast storm-control status
                                             Storm-Control Enabled
                                             Broadcast Traffic limited to 1000 Mbps
                                             Dell#