Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip access-list extended

Name (or select) an extended IP access list (IP ACL) based on IP addresses or protocols.

Syntax

ip access-list extended access-list-name

To delete an access list, use the no ip access-list extended access-list-name command.

Parameters

access-list-name

Enter a string up to 140 characters long as the access list name.

Defaults

All access lists contain an implicit deny any; that is, if no match occurs, the packet is dropped.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The number of entries allowed per ACL is hardware-dependent. For detailed specification on entries allowed per ACL, refer to your line card documentation.

Example

Dell(conf)#ip access-list extended TESTListEXTEND
                                             Dell(config-ext-nacl)#

Related Commands

ip access-list standard — configures a standard IP access list.

resequence access-list — Displays the current configuration.