Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show mac accounting access-list

Display MAC access list configurations and counters (if configured).

Syntax

show mac accounting access-list access-list-name interface interface in | out

Parameters

access-list-name	Enter the name of a configured MAC ACL, up to 140 characters.
interface interface	Enter the keyword `interface` then the one of the following keywords and slot/port or number information: For a Port Channel interface, enter the keywords `port-channel` and then enter a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` and then enter the slot/port information. For a VLAN interface enter the keyword VLAN and then the vlan id
in \| out	Identify whether ACL is applied on ingress or egress side.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The ACL hit counters in this command increment the counters for each matching rule, not just the first matching rule.

Example

Dell#show mac accounting access-list TestMac interface tengigabitethernet 0/1 in 
                                             Ingress Standard mac access-list TestMac on TenGigabitEthernet 0/1
                                             Total cam count 2
                                             seq 5 permit aa:aa:aa:aa:00:00 00:00:00:00:ff:ff count (0 packets)
                                             seq 10 deny any count (20072594 packets)
                                             Dell#