Dell EMC OpenManage Essentials Version 2.5 User's Guide

PDF

Viewing the VLAN Configuration Inventory

To view the VLAN configuration inventory of a chassis:

Click Manage > Devices.
In the device tree, click Modular Systems .
Click PowerEdge M1000e or PowerEdge FX2 and then click the chassis CMC node.

On the right pane, click the VLAN Configuration tab. The VLAN configuration inventory is displayed.

NOTE: If you are accessing the VLAN Configuration tab for the first time, click the refresh icon that is displayed at the middle of the VLAN Configuration tab to display the configuration inventory.

NOTE: The VLAN configuration inventory that is displayed may not be up-to-date. To view the latest VLAN configuration inventory, click the refresh icon that is displayed at the top-right of the VLAN Configuration tab.

NOTE: VLAN configuration inventory is not displayed if the IOAs are not discovered or configured.
Even though the VLAN configuration inventory is not displayed, OpenManage Essentials displays the IOA Name and Model information if it is available. Otherwise a status message is displayed, indicating the reason for the non-availability of the inventory information.

The following table describes the status messages that may be displayed.

Table 1. Viewing the VLAN Configuration Inventory . The following table describes the status messages that may be displayed.
Status	Description
Device not discovered	The IOA is not discovered in OpenManage Essentials.
Slot is empty	The chassis fabric slot is empty.
Firmware or Mode not supported	The operational mode or firmware version of the IOA is not supported.
Unable to retrieve data	OpenManage Essentials is unable to retrieve the VLAN configuration inventory from the IOA.
Unknown/Error	An error occurred or the status is unknown.
Model not supported	The IOA model is not supported.