Dell NetWorker 19.9 Administration Guide

Configuring a stand-alone tape device

1. Log in to the NMC GUI as an administrator of the NetWorker server.
2. On the taskbar, click the Enterprise icon .
3. In the navigation tree, highlight a host:
   1. Right-click NetWorker.
   2. Select Launch Application. The NetWorker Administration window appears.
4. On the taskbar, click the Devices button .
5. In the navigation tree view, right-click a host and select Scan for Devices.
   The Scan for Devices window appears.
6. On the Select Target Storage Nodes window, perform either of the following steps:
   • Select the storage node for the library.
   • Click Create a new Storage Node.
7. Select Start scan.
   NetWorker scans for new devices. The Log pane provides the status of the scan operation.
8. On the left pane, select Devices and then from the right pane, select the new device.
9. From the Devices menu, select Devices > Device Operations > Label.
10. In the Label window, verify the information and click OK.