Dell NetWorker 19.9 Administration Guide

SNMP v3 traps for restore

Use either NMC or the NetWorker CLI to perform a restore.

1. On the NetWorker Administration window, click Server.
2. Under Notifications, select Create a new notification using the SNMP notification command.
   The Create Notification window appears.
3. In the Name attribute, type a name for the notification.
4. In the Event attribute, select Recover.
5. In the Priority attribute, select the priorities of the corresponding actions.
6. In the Action attribute, type the following command to run in response to the selected events and priorities.
   • For Linux NetWorker server: /usr/sbin/nsrtrap <IP address of the Linux Trap Receiver> -i 3
   • For Windows NetWorker server: "C:\Program Files\EMC NetWorker\nsr\bin\nsrtrap.exe" <IP address of the Windows Trap Receiver> -i 3
7. Initiate restore using either NMC or the NetWorker CLI.
   • NMC: Open NMC and navigate to Recover > New Recover.
   • CLI: Go to the NetWorker client on which restore has to be performed and execute the recover command.
   For more information on receiving SNMP traps, see the following sections:

   • Receive SNMP v3 traps on Linux
   • Receive SNMP v3 traps on Windows