Dell NetWorker 19.9 Administration Guide

Viewing disk volume details

1. In the Administration window, click Media.
2. In the left pane, select Disk Volumes.

   A list of disk volumes for the server appears in the right pane. The following table lists the information that appears for each volume.

   Table 1. Disk volumes window

   Category	Description
   Volume Name	Name of the volume, which is the same as the name that appears on the volume label in the NetWorker Administration interface. At the end of the name, one of the following designations might appear: (A) indicates an archive volume. (R) indicates a read-only volume.
   Media Type	The type of media for the volume.
   Used	The amount of space currently in use on the volume, which is shown in KB, MB, or GB, as appropriate. The value of full indicates that there is no more space on the volume or an error has occurred.
   Mode	Whether the volume is appendable, read-only, or recyclable: Appendable volumes contain empty space. Data that meets the acceptance criteria for the pool to which this volume belongs can be appended. Read-only volumes contain read-only save sets. No new data can be written to the volume. However, the save sets are still subject to retention settings, and the volume is recycled when the retention periods for all the save sets on the volume expire. When the mode is read-only, the Mode field appears blank. An (R) appears next to the volume name. Recyclable volumes contain save sets that have all exceeded their retention periods.
   Expiration	The expiration date for the volume. If the recycle policy is set to manual instead of automatic, then manual appears in this column. To change the expiration date for the volume, use the nsrmm command from the command prompt, or right-click the volume, select Recycle, and then select Manual on the Recycle dialog box.
   Pool	Name of the pool to which the volume belongs.
   Location	An administrator-defined description of the physical location of a volume.