Dell NetWorker 19.9 Administration Guide

Depositing a volume by using the import/export feature

Use these general instructions when working with a CAP. Specific instructions for working with a CAP can vary, depending on the library manufacturer. For specific instructions, refer to the library’s documentation.

1. Ensure that volumes are available in the CAP for deposit.
2. In the Administration window, click Devices.
3. Select Libraries in the navigation tree.
   The Libraries detail table appears.
4. Double-click the library in which to deposit the volume.
   The Libraries detail table changes to the double-paned library operations view.
5. Right-click either the device or the slot, and select Deposit.
   You are prompted to deposit the volume.
6. Click Yes. The Library Operation window displays this message:

   The library operation has started.

   The Monitoring > Operations screen displays its status.
7. Click OK.
8. Click Monitoring to go to the Monitoring window, and then select the Operations tab.
9. Right-click the User Input icon for the deposit job and select Supply Input.
   You are prompted to load the cartridges into the ports and type Yes to continue.
10. Click Yes.
11. Right-click the User Input icon for the deposit job and select Supply Input again.
    You are prompted to continue depositing volumes.
12. Click Yes to continue depositing volumes, or No when done.