Dell NetWorker 19.9 Administration Guide

SNMP v2c traps for restore

Use either NMC or the NetWorker CLI to perform a restore.

1. On the NetWorker Administration window, click Server.
2. Under Notifications, select Create a new notification using the SNMP notification command.
   The Create Notification window appears.
3. In the Name attribute, type a name for the notification.
4. In the Event attribute, select Recover.
5. In the Priority attribute, select the priorities of the corresponding actions.
6. In the Action attribute, type a command to run in response to the selected events and priorities.
   • For Linux NetWorker server: /usr/sbin/nsrtrap <IP address of the Linux Trap Receiver>
   • For Windows NetWorker server: “C:\Program Files\EMC NetWorker\nsr\bin\nsrtrap.exe” <IP address of the Windows Trap Receiver>
7. Initiate restore using either NMC or the NetWorker CLI.
   • NMC: Open NMC and navigate to Recover > New Recover.
   • CLI: Go to the NetWorker client on which restore has to be performed and execute the recover command.
   For more information on receiving SNMP traps, see the following sections:

   • Receive SNMP traps on Linux
   • Receive SNMP traps on Windows
   NOTE:

   • Restore workflow configuration is applicable for all file systems as well as NetWorker Modules.
   • When recovering save sets of NMDA Oracle and NMSAP Oracle, multiple SNMP v2c traps (one notification per save set) are sent.