Dell Storage Manager 2020 R1 Administrator's Guide

Add or Remove an iSCSI Fabric

The FluidFS cluster requires two iSCSI subnets (Storage Center fault domains) or "fabrics."

1. In the Storage view, select a FluidFS cluster.
2. Click the NAS Pool tab.
3. Click the Network tab.
4. To add an iSCSI fabric:
   1. In the iSCSI Fabrics panel, click Add iSCSI Fabric. The Add iSCSI Fabric dialog box opens.
   2. In the Appliance ID field, select an ID from the drop-down list.
   3. In the Interface field, select an interface from the drop-down list.
   4. Type in the appropriate information in the Netmask and VLAN Tag fields.
   5. To add the controller IP addresses, select a controller from the list of controllers and then click Edit Settings. The Edit Controller IP Address dialog box opens.
   6. In the IP Address field, type in the address for the controller and then click OK.
   7. Repeat these steps for each controller.
   8. Click OK to close the Edit dialog box.
5. Click OK.
6. To remove a fabric:
   1. In the iSCSI Fabrics panel, select the appliance and then click Delete. The Delete dialog box opens.
   2. Click OK.