Dell Storage Manager 2020 R1 Administrator's Guide

Test Network Connectivity for an iSCSI Port in a Fault Domain

Test connectivity for an iSCSI physical or virtual I/O port by pinging a port or host on the network.

1. If the Dell Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Storage tab.
3. In the Storage tab navigation pane, expand Fault Domains, then expand iSCSI and click the fault domain.
4. In the right pane, right-click the physical port for which you want to test connectivity, then select Ping Address.
   The Ping Address dialog box opens.
5. Type the IP address of the host to which you want to test connectivity.
   • If the host uses either IPv4 or IPv6 addressing, type the IP address of the host to which you want to test connectivity in the IP Address field.
   • If the host uses IPv4 addressing only, type the IPv4 address in the IPv4 Address field.
6. Click OK. A message displays the results of the test.
7. Click OK.