Dell Storage Manager 2020 R1 Administrator's Guide

Configure Network Settings for a Virtual Appliance

Use the Network Configuration dialog box to configure network settings and enable or disable SSH on the Virtual Appliance.

1. Connect to the Data Collector.
   1. Open a web browser.
   2. Type the address of the Data Collector in the web browser using the following format:
      https://data_collector_host_name_or_IP_address:3033/
   3. Press Enter.
      The Unisphere Central login page is displayed.
   4. Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password field.
   5. Click Log In.
2. If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
   The Unisphere CentralHome page is displayed.
3. Click Data Collector.
   The Data Collector view is displayed.
4. Click the Virtual Appliance tab, and then click the Network subtab.
5. Click Edit.
   The Network Configuration dialog box opens.
6. In the Hostname field, type the host name of the Virtual Appliance.
7. In the Domain field, type the domain name of the Virtual Appliance.
8. To enable the Secure Shell (SSH), select the Enable SSH checkbox.
9. Select the network configuration type from the Configuration drop-down menu.
   • DHCP - Dynamic IP address
   • Static - Static IP address
10. If the network configuration is set to Static:
    1. Type the IP address of one or more Domain Name System (DNS) servers in the DNS field.
       NOTE:Separate multiple IP addresses using commas.
    2. To configure IPv4 network settings, select the IPv4 radio button, and type the IP Address, netmask, and gateway in the associated fields.
       To configure IPv6 network settings, select the IPv6 radio button, and type the IP Address, gateway, and prefix length in the associated fields.
11. Click OK.