Dell Storage Manager 2020 R1 Administrator's Guide

Replace a Failed Cooling Fan Sensor

This step-by-step wizard guides you through replacing a failed cooling fan sensor in the Storage Center without a controller outage.

1. If the Dell Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand either Controllers or Enclosures, then select and expand either a controller or an enclosure.
   Either the Enclosure or Controller view is displayed.
4. Under the selected enclosure or controller, click Fan Sensors.
   The Fan Sensors view is displayed.
5. In the right pane. select the failed sensor and click Replace Failed Cooling Fan Sensor.
   The Replace Failed Cooling Fan Sensor wizard opens.
6. Refer to the graphic in the wizard to locate the failed cooling fan sensor. Click Next.
7. Follow the instructions to remove the power supply from the enclosure. Click Next.
8. Follow the instructions to insert the replacement power supply. Click Next to verify the replacement.
   If this verification fails, an error message is displayed. You can proceed to the next step once the error is corrected and validated.
9. Click Finish to exit the wizard.