Dell Storage Manager 2020 R1 Administrator's Guide

Modify iSCSI Fault Domain Control Port Network Settings

Configure an IP address and gateway for the iSCSI control port in the fault domain. Servers target this IP address using iSCSI initiators, and the Storage Center redirects individual iSCSI connections to the appropriate virtual port.

1. If the Dell Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Storage tab.
3. In the Storage tab navigation pane, expand Fault Domains, then expand iSCSI and click the fault domain.
4. In the right pane, click Edit Settings.
   The Edit Fault Domain Settings dialog box opens.
5. In the Target IPv4 Address field, type an IP address to assign to the iSCSI control port.
6. In the Subnet Mask field, type the subnet mask for the well-known IP address.
7. In the Gateway IPv4 Address field, type the IP address for the iSCSI network default gateway.
8. (Optional) If IPv6 is supported, in the Target IPv6 Address field, type an IP address to assign to the iSCSI control port.
9. Click OK.