Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Assign user role

To limit OS10 system access, assign a role when you configure each user.

• Enter a user name, password, and role in CONFIGURATION mode.

  username username password password role role

  • username username — Enter a text string. A maximum of 32 alphanumeric characters; 1 character minimum.
  • password password — Enter a text string. A maximum of 32 alphanumeric characters; 9 characters minimum.
  • role role — Enter a user role:
    • sysadmin — Full access to all commands in the system, exclusive access to commands that manipulate the file system, and access to the system shell. A system administrator can create user IDs and user roles.
    • secadmin — Full access to configuration commands that set security policy and system access, such as password strength, AAA authorization, and cryptographic keys. A security administrator can display security information, such as cryptographic keys, login statistics, and log information.
    • netadmin — Full access to configuration commands that manage traffic flowing through the switch, such as routes, interfaces, and ACLs. A network administrator cannot access configuration commands for security features or view security information.
    • netoperator — Access to EXEC mode to view the current configuration with limited access. A network operator cannot modify any configuration setting on a switch.

Create user and assign role

OS10(config)# username smith password silver403! role sysadmin

View users

OS10# show users

Index Line  User    Role     Application Idle  Login-Time             Location
----- ----  ------  ------   ----------- ----  ---------------------  -------------
1     ttyS  root    root     -bash       >24h  2018-05-23 T23:05:03Z  console
2     pts/0 admin   sysadmin bash        1.1s  2018-05-30 T20:04:27Z  10.14.1.214[ssh]