Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• Neighbor—Displays the BGP neighbor address.
• AS—Displays the AS number of the neighbor
• MsgRcvd—Displays the number of BGP messages that the neighbor received.
• MsgSent—Displays the number of BGP messages that the neighbor sent.
• Up/Down—Displays the amount of time that the neighbor is in the Established stage. If the neighbor has never moved into the Established stage, the word never displays. The output format is:

  1 day = 00:12:23 (hours:minutes:seconds), 1 week = 1d21h (DaysHours), 1 week + 11w2d (WeeksDays)

• State/Pfxrcd—If the neighbor is in the Established stage, this is the number of network prefixes received. If you configured a maximum limit using the neighbor maximum-prefix command, prfxd appears in this column. If the neighbor is not in the Established stage, the current stage - Idle, Connect, Active, OpenSent, OpenConfirm displays. When the peer is transitioning between states and clearing the routes received, the phrase Purging may appear in this column. If the neighbor is disabled, the phrase Admin shut appears in this column.

The suppressed status of aggregate routes may not display in the command output.

OS10# show ip bgp summary 
BGP router identifier 80.1.1.1 local AS number 102
Neighbor   AS    MsgRcvd  MsgSent  Up/Down    State/Pfx      
80.1.1.2   800   24       23       00:09:15   5 

Example for unnumbered peer: