Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Onboard a Server onto the Fabric wizard

To onboard a server, select a server profile, associate an interface to onboard a server, and associate a network or multiple networks. To do so:

1. Launch the Onboard a Server onto the Fabric wizard.
2. Select the server profile from the list or create a profile for the interface using ADD SERVER PROFILE.

   ADD SERVER PROFILE — Create a server profile by providing the server profile type, name, and bonding technology.

3. Select an interface ID from the list if the server interface is discovered or enter an ID, and click NEXT.
4. Associate an interface of the leaf switch to onboard the server:
   1. Select the NIC bonding.
   2. Select if it is a static onboarding. If it is a static onboarding, assign an interface of the leaf switch, and click NEXT.
5. Associate the networks to the server interface profile from the list or create a network or virtual network according to the network connectivity.
   • ADD NETWORK — A template to create a general-purpose, L3 VLAN, VXLAN, and L3 Routed networks.
   • ADD VIRTUAL NETWORK — A template to create a VXLAN network.

From the SFS GUI Server Profiles tab, you can view the list of all server profiles configured in the SFS. The page displays the details of server profiles such as bonding technology, discovery of the server, and onboarding status. You can also delete a server profile from this tab. Select a server profile from the list, and click DELETE.

From the SFS GUI Network Profiles tab, you can view the list of all networks configured in the SFS. The page displays the details of networks such as name, description, QoS priority, and network type. You can also delete a network from this tab. Select a network from the list, and click DELETE.