Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Verify the configuration using the following show commands:

• To verify FSB mode and the CVL status, use the show fcoe system command.

  FSB1# show fcoe system
  Mode                         : FSB
  CVL Status                   : Enabled
  FCOE VLAN List (Operational) : 777
  FCFs                         : 1
  Enodes                       : 2
  Sessions                     : 2

• To verify the discovered ENodes, use the show fcoe enode command.

  FSB1# show fcoe enode
  Enode MAC           Enode Interface     VLAN     FCFs    Sessions
  -----------------------------------------------------------------
  32:03:cf:45:00:00   Eth 1/1/31           777      1        1
  f4:e9:d4:f9:fc:40   Eth 1/1/5            777      1        1

• To verify the discovered FCFs, use the show fcoe fcf command.

  FSB1# show fcoe fcf
  FCF MAC             FCF Interface       VLAN     FC-MAP         FKA_ADV_PERIOD    No. of Enodes      FCF Mode
  --------------------------------------------------------------------------------------------------------------
  14:18:77:20:86:ce   Eth 1/1/2            777      0e:fc:00       8000              2                   F

  FSB2# show fcoe fcf
  FCF MAC            FCF Interface       VLAN     FC-MAP         FKA_ADV_PERIOD     No. of Enodes      FCF Mode
  --------------------------------------------------------------------------------------------------------------
  14:18:77:20:86:ce   Eth 1/1/13          777      0e:fc:00       8000               0                   FT 

• To verify the list of FCoE sessions, use the show fcoe sessions command.

  FSB1# show fcoe sessions
  Enode MAC         Enode Interface  FCF MAC         FCF interface  VLAN  FCoE MAC          FC-ID    PORT WWPN            
  PORT WWNN
  ---------------------------------------------------------------------------------------------------------------
  32:03:cf:45:00:00 Eth 1/1/31    14:18:77:20:86:ce  Eth 1/1/2     777   0e:fc:00:05:00:05 05:00:05 33:00:55:2c:cf:55:00:00 
  23:00:55:2c:cf:55:00:00
  f4:e9:d4:f9:fc:40 Eth 1/1/5     14:18:77:20:86:ce  Eth 1/1/2     777   0e:fc:00:02:01:00 02:01:00 20:01:f4:e9:d4:a4:7d:c3  
  20:00:f4:e9:d4:a4:7d:c3
  

• To verify the name server entries on the FCF, use the show fc ns switch brief command.

  FCF# show fc ns switch brief
  Total number of devices = 3
  
  Intf#                      Domain     FC-ID      Enode-WWPN              Enode-WWNN
  
  fibrechannel1/1/3            2       02:00:00  21:00:00:24:ff:7c:ae:0e   20:04:00:11:0d:64:67:00
  ethernet1/1/13               2       02:01:00  20:01:f4:e9:d4:a4:7d:c3   23:00:55:2c:cf:55:00:00

• To verify the active zoneset on the FCF, use the show fc zoneset active command.

  FCF# show fc zoneset active
  
  vFabric id: 2
  Active Zoneset: zonesetA
  ZoneName                         ZoneMember
  ===========================================================
  zoneA                            20:01:f4:e9:d4:a4:7d:c3                                                                                                     
                                   21:00:00:24:ff:7c:ae:0e