Dell EMC SmartFabric OS10 User Guide Release 10.5.0

You manually configure a static MAC address entry. A static entry is not subject to aging.

• Create a static MAC address entry in the MAC address table in CONFIGURATION mode.

  mac-address-table static nn:nn:nn:nn:nn vlan vlan-id interface [ethernet node/slot/port[:subport] | port-channel channel-number]

  NOTE Before using the mac-address-table static command, create the required VLANs. If you do not create a VLAN before configuring a static MAC address entry, the system displays an error message.

Set Static MAC Address

OS10(config)# interface vlan 10
OS10(conf-if-vl-11)# exit
OS10(config)# mac address-table static 34:17:eb:f2:ab:c6 vlan 10 interface ethernet 1/1/5