メイン コンテンツに進む
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration(会社情報の管理)」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

radius-server host

Configures a RADIUS server and the key used to authenticate the switch on the server.

Syntax
radius-server host {hostname | ip-address} key {0 authentication-key | 9 authentication-key | authentication-key} [auth-port port-number]
Parameters
  • hostname — Enter the host name of the RADIUS server.
  • ip-address — Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server.
  • key 0 authentication-key — Enter an authentication key in plain text. A maximum of 42 characters.
  • key 9 authentication-key — Enter an authentication key in encrypted format. A maximum of 128 characters.
  • authentication-key — Enter an authentication in plain text. A maximum of 42 characters. It is not necessary to enter 0 before the key.
  • auth-port port-number — (Optional) Enter the UDP port number used on the server for authentication, from 1 to 65535, default 1812.
Default
Not configured
Command Mode
CONFIGURATION
Usage Information
The authentication key must match the key configured on the RADIUS server. You cannot enter spaces in the key. The show running-configuration output displays both unencrypted and encrypted keys in encrypted format. Configure global settings for the timeout and retransmit attempts allowed on RADIUS servers using the radius-server retransmit and radius-server timeout commands.

Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1.

The no version of this command removes a RADIUS server configuration.
Example
OS10(config)# radius-server host 1.5.6.4 key secret1 
Supported Releases
10.2.0E or later

このコンテンツを評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
0/3000 characters
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  この記事は役に立ちましたか?
  コメントでは、以下の特殊文字は利用できません: <>()\