Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Configure SNMP groups

Configure an SNMP group with the views allowed for the members of the group. Specify the read-only, read-write, and/or notification access to the SNMP agent.

Enter an ACL to limit user access so that only messages from and to ACL-allowed users are received and sent from the SNMP agent on the switch.

snmp-server group group-name {v1 | v2c | v3 security-level} [access acl-name]  
[read view-name] [write view-name] [notify view-name]

To configure a view of the MIB tree on the SNMP agent, use the snmp-server view command.

To configure an SNMPv3 user's authentication and privacy settings, use the snmp-server user command.

To display the configured SNMP groups, use the show snmp group command.

Configure SNMPv1 or v2c group

OS10(config)# snmp-server group v2group 2c read readview notify GetsSets

Configure SNMPv3 group

OS10(config)# snmp-server group v3group 3 priv read readview write writeview notify alltraps

Display SNMP groups

OS10# show snmp group 
groupname               : v2group
version                 : 2c
notifyview              : GetsSets
readview                : readview

groupname               : v3group
version                 : 3
security level          : priv
notifyview              : alltraps
readview                : readview
writeview               : writeview