Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• management—Enter the keyword to display NTP information corresponding to the management VRF instance.
• vrf-name—Enter the keyword then the name of the VRF to display NTP information corresponding to that nondefault VRF instance.

• (none)—One or more of the following symbols displays:
  • *—Synchronized to this peer.
  • #—Almost synchronized to this peer.
  • +—Peer was selected for possible synchronization.
  • -—Peer is a candidate for selection.
  • ~—Peer is statically configured.
• remote—Remote IP address of the NTP peer.
• ref clock—IP address of the remote peer reference clock.
• st—Peer stratum, the number of hops away from the external time source. 16 means that the NTP peer cannot reach the time source.
• when—Last time the device received an NTP packet.
• poll—Polling interval in seconds.
• reach—Reachability to the peer in octal bitstream.
• delay—Time interval or delay for a packet to complete a round-trip to the NTP time source in milliseconds.
• offset—Relative time of the NTP peer clock to the network device clock in milliseconds.
• disp—Dispersion.

Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1

OS10# show ntp associations
remote      ref clock  st when poll reach delay  offset disp
=============================================================
 10.10.120.5 0.0.0.0     16 - 256        0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16         377   -0.08 -1499.9 104.16
 172.31.1.33 0.0.0.0     16 - 256        0 0.00 0.000 16000.0
 192.200.0.2 0.0.0.0     16 - 256        0 0.00 0.000 16000.0

OS10# show ntp associations vrf management
remote     local      st    poll reach  delay       offset        disp
=======================================================================
*1.1.1.2   1.1.1.1     3    64    1     0.00027     0.000056    0.43309