Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• username username—Enter a text string. A maximum of 32 alphanumeric characters; one character minimum.
• password password—Enter a text string. A maximum of 32 alphanumeric characters; nine characters minimum. Password prefixes $1$, $5$, and$6$ are not supported in clear-text passwords.
• role role—Enter a user role:
  • sysadmin — Full access to all commands in the system, exclusive access to commands that manipulate the file system, and access to the system shell. A system administrator can create user IDs and user roles.
  • secadmin — Full access to configuration commands that set security policy and system access, such as password strength, AAA authorization, and cryptographic keys. A security administrator can display security information, such as cryptographic keys, login statistics, and log information.
  • netadmin — Full access to configuration commands that manage traffic flowing through the switch, such as routes, interfaces, and ACLs. A network administrator cannot access configuration commands for security features or view security information.
  • netoperator — Access to EXEC mode to view the current configuration with limited access. A network operator cannot modify any configuration setting on a switch.
• priv-lvl privilege-level — Enter a privilege level, from 0 to 15. If you do not specify the priv-lvl option, the system assigns privilege level 1 for the netoperator role and privilege level 15 for the sysadmin, secadmin, and netadmin roles.

• User name and password entries are in clear text.
• There is no default user role.
• The default privilege levels are level 1 for netoperator, and level 15 for sysadmin, secadmin, and netadmin.

! # % & ' ( ) ; < = > [ ] * + - . / : ^ _

You cannot assign a privilege level higher than privilege level 1 to a user with the netoperator role and higher than privilege level 2 for a sysadmin, secadmin, and netadmin roles.

To increase the required password strength, use the password-attributes command. The no version of this command deletes the authentication for a user.

Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1.

OS10(config)# username user05 password newpwd404 role sysadmin priv-lvl 10