Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Configure the system to advertise TLVs from specific interfaces. If you configure the LLDP to advertise TLVs on an interface, only the interface sends LLDPDUs with the specified TLVs.

By default, all LLDP TLVs except VLAN name TLV are advertised. To advertise VLAN name TLV, you can configure the system to advertise the names of VLANs in LLDPDUs. For more information, see Advertise VLAN name TLVs.

1. Enable basic TLV attributes to transmit and receive LLDP packets in INTERFACE mode.

   lldp tlv-select basic-tlv {port-description | system-name | system-description | system-capabilities | management-address}

2. Enable dot3 TLVs to transmit and receive LLDP packets in INTERFACE mode.

   lldp tlv-select dot3tlv {macphy-config | max-framesize}

3. Enable dot1 TLVs to transmit and receive LLDP packets in INTERFACE mode.

   lldp tlv-select dot1tlv {port-vlan-id | link-aggregation | vlan-name}