Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• vrf vrf-name — (Optional) Enter vrf then the name of the VRF to display the neighbors corresponding to that VRF. If you do not specify this option, neighbors corresponding to the default VRF display.
• ipv6-address — Enter the IPv6 address of the neighbor in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zero.
• interface interface — Enter interface then the interface type and slot/port or number information:
  • For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet then the slot/port/subport[/subport] information.
  • For a 40-Gigabit Ethernet interface, enter fortyGigE then the slot/port information.
  • For a port channel interface, enter port-channel then a number.
  • For a VLAN interface, enter vlan then a number from 1 to 4093.

The no version of this command resets the value to the default.

OS10# show ipv6 neighbors
IPv6 Address     Hardware Address    State   Interface       VLAN
-----------------------------------------------------------------
1001:db8:a1::2   00:c5:05:02:12:91   REACH   ethernet1/1/5   12  
1001:db8:a1::f   00:f5:50:02:54:75   REACH   port-channel5   12  
200::2           00:c5:05:02:12:91   STALE   ethernet1/1/10
400::f           00:f5:50:02:54:75   REACH   port-channel20