Dell EMC SmartFabric OS10 User Guide Release 10.5.0

View sFlow information

OS10 does not support statistics for UDP packets dropped and samples received from the hardware.

• View sFlow configuration details and statistics in EXEC mode.

  OS10# show sflow
  sFlow services are enabled
  Management Interface sFlow services are disabled
  Global default sampling rate: 32768
  Global default counter polling interval: 30
  Global default extended maximum header size: 128 bytes
  Global extended information enabled: none
  1 collector(s) configured
  Collector IP addr:10.16.151.245 Agent IP addr:10.16.132.181 UDP port:6343 VRF:Default
  31722 UDP packets exported
  0 UDP packets dropped
  34026 sFlow samples collected

• View sFlow configuration details on a specific interface in EXEC mode.

  OS10# show sflow interface port-channel 1
  port-channel1
  sFlow is enabled on port-channel1
  Samples rcvd from h/w: 0

• View the sFlow running configuration in EXEC mode.

  OS10# show running-configuration sflow
  sflow enable
  sflow max-header-size 80
  sflow polling-interval 30
  sflow sample-rate 4096
  sflow collector 10.16.150.1 agent-addr 10.16.132.67 6767 max-datagram-size 800
  sflow collector 10.16.153.176 agent-addr 3.3.3.3 6666
  !
  interface ethernet1/1/1
  sflow enable
  !