Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• Address—IP addresses of the IP PIM-enabled interfaces
• Interface—Interface type with slot/port information or VLAN/Port Channel ID
• Version/Mode—PIM version number and mode; v2 for PIM version 2 and S for PIM sparse mode
• Nbr Count—Active neighbor count on the PIM-enabled interface
• Query interval—Query interval for router query messages on that interface
• DR priority—Designated router priority value configured on that interface
• DR—IP address of the DR for that interface

OS10# show ip pim interface
Address   Interface Ver/Mode Nbr Count Query Intvl DR Prio  DR
----------------------------------------------------------------------
2.2.2.2   vlan103   v2/S      1         30          1       2.2.2.2
3.3.3.2   vlan105   v2/S      1         30          1       3.3.3.2
122.1.1.2 vlan121   v2/S      0         30          1       122.1.1.2