Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• process-id—(Optional) Displays LSA information for a specific OSPF process ID. If you do not enter a process ID, this command applies only to the first OSPF process.
• vrf vrf-name — (Optional) Displays LSA information for a specified OSPF process ID corresponding to a VRF.

• LS Age—Displays the LS age.
• Options—Displays the optional capabilities available on the router.
• LS Type—Displays the LS type.
• Link State ID—Identifies the router ID.
• Advertising Router—Identifies the advertising router’s ID.
• LS Seq Number—Identifies the LS sequence number. This identifies old or duplicate LSAs.
• Checksum—Displays the Fletcher checksum of an LSA’s complete contents.
• Length—Displays the LSA length in bytes.
• Network Mask—Identifies the network mask implemented on the area.
• TOS—Displays the ToS options. The only option available is zero.
• Metric—Displays the LSA metric.

OS10# show ip ospf 10 database summary 
     OSPF Router with ID (111.2.1.1) (Process ID 10)

                Summary Network (Area 0.0.0.0)

  LS age: 623
  Options: (No TOS-capability, No DC)
  C: Summary Network
  Link State ID: 115.1.1.0
  Advertising Router: 111.111.111.1
  LS Seq Number: 0x800001e8
  Checksum: 0x4a67
  Length: 28
  Network Mask: /24
      TOS: 0 Metric: 0