Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• show ip ospf [instance-number] [vrf vrf-name] statistics [interface interface]

• instance-number — (Optional) Enter an OSPF instance number, from 1 to 65535.
• vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to display OSPF traffic statistics corresponding to that VRF.
• interface interface — (Optional) Enter the interface information:
  • ethernet node/slot/port[:subport] — Enter an Ethernet port interface.
  • port-channel number — Enter the port-channel interface number, from 1 to 128.
  • vlan vlan-id — Enter the VLAN ID number, from 1 to 4093.

OS10# show ip ospf 10 statistics 
Interface vlan3050
  Receive Statistics
     rx-invalid          0    rx-invalid-bytes     0 
     rx-hello            0    rx-hello-bytes       0
     rx-db-des           0    rx-db-des-bytes      0
     rx-ls-req           0    rx-ls-req-bytes      0
     rx-ls-upd           0    rx-ls-upd-bytes      0
     rx-ls-ack           0    rx-ls-ack-bytes      0   
  Transmit Statistics
     tx-failed           0    tx-failed-bytes      0
     tx-hello            0    tx-hello-bytes       0
     tx-db-des           0    tx-db-des-bytes      0
     tx-ls-req           0    tx-ls-req-bytes      0
     tx-ls-upd           0    tx-ls-upd-bytes      0
     tx-ls-ack           0    tx-ls-ack-bytes      0
  Error packets (Receive statistics)
     bad-src             0   dupe-id               0   hello-err           0
     mtu-mismatch        0   nbr-ignored           0   wrong-proto         0
     resource-err        0   bad-lsa-len           0   lsa-bad-type        0
     lsa-bad-len         0   lsa-bad-cksum         0   auth-fail           0
     netmask-mismatch    0   hello-tmr-mismatch    0   dead-ivl-mismatch   0
     options-mismatch    0   nbr-admin-down        0   own-hello-drop      0
     self-orig             0   wrong-length        0   checksum-error      0   
     version-mismatch      0   area-mismatch       0