Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Configure SNMP views

Configure a read-only, read-write, or notify view of the MIB tree structure in the SNMP agent on the switch.

The oid-tree value specifies the OID in the MIB tree hierarchy at which a view starts. Enter included or excluded to include or exclude the rest of the sub-tree MIB contents in the view. If necessary, re-enter the command to exclude tree entries in the included content.

snmp-server view view-name oid-tree [included | excluded]

Configure read-only view

OS10(config)# snmp-server view readonly 1.3.6.1.2.1.31.1.1.1.6 included

Configure read-write view

OS10(config)# snmp-server view rwView 1.3.6.1.2.1.31.1.1.1.6 included
OS10(config)# snmp-server view rwView 1.3.6.1.2.1.31.0.0.0.0 excluded

Display SNMP views

OS10# show snmp view 
view name               : readview
OID                     : 1.3.6.5
excluded                : True