Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Configure a VRRP version for the system. Define either VRRPv2 — vrrp version 2 or VRRPv3 — vrrp version 3.

• Configure the VRRP version for IPv4 in INTERFACE mode.

  vrrp version 

Configure VRRP version 3

OS10(config)# vrrp version 3

1. Set the switch with the lowest priority to vrrp version 2.
2. Set the switch with the highest priority to vrrp version 3.
3. Set all switches from vrrp version 2 to vrrp version 3.

Migrate IPv4 group from VRRPv2 to VRRPv3

OS10_backup_switch1(config)# vrrp version 2
OS10_backup_switch2(config)# vrrp version 2

Set master switch to VRRPv3

OS10_master_switch(config)# vrrp version 3

Set backup switches to VRRPv3

OS10_backup_switch1(config)# vrrp version 3
OS10_backup_switch2(config)# vrrp version 3