Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Restrict SNMP access

To filter SNMP requests on the switch, assign access lists to an SNMP community. Both IPv4 and IPv6 access lists are supported.

1. Create access lists with permit or deny filters; for example:

   OS10(config)# ip access-list snmp-read-only-acl
   OS10(config-ipv4-acl)# permit ip 172.16.0.0 255.255.0.0 any
   OS10(config-ipv4-acl)# exit
   OS10(config)#

2. Apply ACLs to an SNMP community in CONFIGURATION mode.

   OS10(config)# snmp-server community public ro acl snmp-read-only-acl 

OS10# show snmp community
Community : public
Access : read-only
ACL : snmp-read-only-acl