Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• fc-map — Enter the FC map ID, from 0xefc00 to 0xefcff.
• fcf-priority-value — Enter the FCF priority value, from 1 to 255.
• adv-period — Enter the FCF keepalive advertisement period, from 8 to 90 seconds.
• vlan-priority-value — Enter the VLAN priority value, from 0 to 7.

• fcmap—0x0EFC00
• fcf-priority—128
• fka-adv-period—8
• vlan-priority—3
• keep-alive—True

The no version of this command disables the FCoE parameters.

OS10(config)# vfabric 10
OS10(conf-vfabric-10)# name 10
OS10(conf-vfabric-10)# fcoe fcmap 0x0efc01
OS10(conf-vfabric-10)# fcoe fcf-priority 128
OS10(conf-vfabric-10)# fcoe fka-adv-period 8
OS10(conf-vfabric-10)# fcoe vlan-priority 3