Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• username — Enter an OS10 user name who logs in on a remote client. This value is the user name configured using the username password role command.
• filepath — Enter the absolute path name of the local file containing the public keys used by remote devices to log in to the OS10 switch.

The default SSH public keys are an RSA key generated using 2048 bits, an ECDSA key with 256 bits, and an Ed2559 key with 256 bits.

Before you use the command, locate the public keys on a remote client in the ~/.ssh/id_rsa.pub file. Create a text file and copy the SSH public keys on the remote client into the file. Enter each public key on a separate line. Download the file to your home OS10 directory.

Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.1.0. Also supported in SmartFabric mode starting in release 10.5.0.1.

The no version of the command removes the SSH password-less configuration for the specified user name.

OS10(config)# username user10 sshkey filename /test_file.txt

OS10(config)# do show running-configuration users
username admin password $6$q9QBeYjZ$jfxzVqGhkxX3smxJSH9DDz7/3OJc6m5wjF8nnLD
7/VKx8SloIhp4NoGZs0I/UNwh8WVuxwfd9q4pWIgNs5BKH. role sysadmin

username user10 password $6$rounds=656000$G10VRFTJB291ekwo$iTGf0zd4bTUcBBpI
Vsbr6oStnUZMydN5lDs4WE6G3XHEtWbcKrGTeAo1wEF0cenEgRRPzi3SMmYyzAHCCC8wS0 role
 sysadmin

username user10 sshkey filename /test_file.txt