メイン コンテンツに進む
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration(会社情報の管理)」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

deny tcp (IPv6)

Configures a filter that drops TCP IPv6 packets meeting the filter criteria.

Syntax
deny tcp [A::B | A::B/x | any | host ipv6-address [operator]] [A::B | A:B/x | any | host ipv6-address [operator]] [ack | fin | psh | rst | syn | urg] [capture | count | dscp value | fragment | log]
Parameters
  • A::B — Enter the IPv6 address in hexadecimal format separated by colons.
  • A::B/x — Enter the number of bits to match to the IPv6 address.
  • any — (Optional) Enter the keyword any to specify any source or destination IP address.
  • host ipv6-address — (Optional) Enter the IPv6 address to use a host address only.
  • capture — (Optional) Capture packets the filter processes.
  • count — (Optional) Count packets the filter processes.
  • byte — (Optional) Count bytes the filter processes.
  • dscp value — (Optional) Deny a packet based on the DSCP values, from 0 to 63.
  • fragment — (Optional) Use ACLs to control packet fragments.
  • log — (Optional) Enables ACL logging. Information about packets that match an ACL rule are logged.
  • operator — (Optional) Enter a logical operator to match the packets on the specified port number. The following options are available:
    • eq — Equal to
    • gt — Greater than
    • lt — Lesser than
    • neq — Not equal to
    • range — Range of ports, including the specified port numbers.
Default
Not configured
Command Mode
IPV6-ACL
Usage Information
OS10 cannot count both packets and bytes; when you use the count byte options, only bytes increment. The no version of this command removes the filter.
Example
OS10(config)# ipv6 access-list ipv6test
OS10(conf-ipv6-acl)# deny tcp any any capture session 1 
Supported Releases
10.2.0E or later

このコンテンツを評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
0/3000 characters
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  この記事は役に立ちましたか?
  コメントでは、以下の特殊文字は利用できません: <>()\