Dell EMC SmartFabric OS10 User Guide Release 10.5.0

System logging

You can change the system logging default settings using the severity level to control the type of system messages that log. The range of logging severities are:

• log-emerg—System is unstable.
• log-alert—Immediate action is needed.
• log-crit—Critical conditions
• log-err—Error conditions
• log-warning—Warning conditions
• log-notice—Normal, but significant conditions (default)
• log-info—Informational messages
• log-debug—Debug messages

• Enter the minimum severity level for logging to the console in CONFIGURATION mode.

  logging console severity

• Enter the minimum severity level for logging to the system log file in CONFIGURATION mode.

  logging log-file severity

• Enter the minimum severity level for logging to terminal lines in CONFIGURATION mode.

  logging monitor severity

• Configure the remote syslog server in CONFIGURATION mode.

  logging server {ipv4–address | ipv6–address} [tcp | udp | tls] [port-number] 
  [severity severity-level] [vrf {management | vrf-name]

OS10(config)# logging server 10.11.86.139 severity log-notice