メイン コンテンツに進む
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration(会社情報の管理)」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

show monitor session

Displays information about a monitoring session.

Syntax
show monitor session {session-id | all}
Parameters
  • session-id—Enter the session ID number, from 1 to 18.
  • all—View all monitoring sessions.
Default
All
Command Mode
EXEC
Usage Information
In the State field, true indicates that the port is enabled. In the Reason field, Is UP indicates that hardware resources are allocated .
Example (specific session)
OS10# show monitor session 1
S.Id Source      Destination Dir   Mode  Source IP   Dest IP     DSCP  TTL  Gre-Protocol  State Reason
------------------------------------------------------------------------------------------------------
1   ethernet1/1/1 remote-ip  both  port  11.11.11.1  11.11.11.11    0  255  35006         true   Is UP
Example (all sessions)
OS10# show monitor session all
S.Id  Source        Destination  Dir  Mode  Source IP    Dest IP     DSCP  TTL  Gre-Protocol   State  Reason
------------------------------------------------------------------------------------------------------------
1    ethernet1/1/1  remote-ip    both  port  11.11.11.1  11.11.11.11  0    255  35006          true   Is UP
9    ethernet1/1/9               both  port  N/A         N/A               N/A                 N/A      N/A
7    ethernet1/1/9    vlan40     both  port  N/A         N/A               N/A                 N/A      N/A
4    ethernet1/1/1               both  port  N/A         N/A          0    255  35006          false  Destination is not resolved
6    ethernet1/1/2  remote-ip    both  port  11.11.11.1  2.2.2.1      0    255  35006          false  Base session does not exist
Supported Releases
10.2.0E or later

このコンテンツを評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
0/3000 characters
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  この記事は役に立ちましたか?
  コメントでは、以下の特殊文字は利用できません: <>()\