Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• vrf vrf-name — (Optional) Enter vrf then the name of the VRF to clear the neighbor corresponding to that VRF. If you do not specify this option, the neighbors in the default VRF clear.
• ipv6-address — Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specific IPv6 neighbor. The :: notation specifies successive hexadecimal fields of zero.
• interface interface — To remove all neighbor entries learned on a specific interface, enter the keyword interface then the interface type and slot/port or number information of the interface:
  • For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet then the slot/port/subport[/subport] information.
  • For a 40-Gigabit Ethernet interface, enter fortyGigE then the slot/port information.
  • For a port channel interface, enter port-channel then a number.
  • For a VLAN interface, enter vlan then a number from 1 to 4093.
  • virtual-network vn-id — For a virtual network, enter virtual-network then the ID of the network.

The no version of this command resets the value to the default.