Dell EMC SmartFabric OS10 User Guide Release 10.5.0

You can clear dynamic address entries that in the MAC address table maintains.

• Clear the MAC address table of dynamic entries in EXEC mode.

  clear mac address-table dynamic [[all] [address mac_addr] [vlan vlan-id] [interface {ethernet type node/slot/port[:subport] | port-channel number}]

  • all — (Optional) Clear all dynamic entries.
  • address mac_address — (Optional) Clear a MAC address entry.
  • vlan vlan-id — (Optional) Clear a MAC address table entry from a VLAN number, from 1 to 4093.
  • ethernet node/slot/port[:subport] — (Optional) Clear an Ethernet interface entry.
  • port—channel number — (Optional) Clear a port-channel number, from 1 to 128.

Clear MAC Address Table

OS10# clear mac address-table dynamic vlan 20 interface ethernet 1/2/20