Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• process-id—(Optional) Displays AS external Type 5 LSA information for a specified OSPF process ID. If you do not enter a process ID, this command applies only to the first OSPF process.
• vrf vrf-name — (Optional) Displays AS external (Type 5) LSA information for a specified OSPF Process ID corresponding to a VRF.

• LS Age — Displays the LS age.
• Options — Displays the optional capabilities available on the router.
• LS Type — Displays the LS type.
• Link State ID — Identifies the router ID.
• Advertising Router — Identifies the advertising router’s ID.
• LS Seq Number — Identifies the LS sequence number. This identifies old or duplicate LSAs.
• Checksum — Displays the Fletcher checksum of an LSA’s complete contents.
• Length — Displays the LSA length in bytes.
• Network Mask — Identifies the network mask implemented on the area.
• TOS — Displays the ToS options. The only option available is zero.
• Metric — Displays the LSA metric.

OS10# show ip ospf 10 database external

 OSPF Router with ID (111.2.1.1) (Process ID 10)

                Type-5 AS External

  LS age: 1424
  Options: (No TOS-capability, No DC, E)
  LS type: Type-5 AS External
  Link State ID: 110.1.1.0
  Advertising Router: 111.2.1.1
  LS Seq Number: 0x80000009
  Checksum: 0xc69a
  Length: 36
  Network Mask: /24
      Metric Type: 2
      TOS: 0
      Metric: 20
      Forward Address: 110.1.1.1
      External Route Tag: 0