Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Omreport controller status

The following table describes the syntax for the omreport Controller commands.

Table 1. omreport controller commands . The following table describes the syntax for the omreport Controller command and its usage.
Required command levels (1, 2, 3) Optional name=value pairs Use
omreport storage controller   Displays property information for all controllers attached to the system.
  controller=id, where id is the controller number. For example, controller=0 Displays the specified controller and all attached components such as enclosures, virtual disks, physical disks, HHHL cards, and so on.
  controller=id info=foreignkeyids Displays the locked foreign configuration information for import or clear operations.
  controller=id info=pdslotreport

Displays the empty and occupied slot details of enclosures in the controller.

  • NOTE: This command is not supported on Blackplane, SCSI, and SWRAID controllers.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\