Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Omreport System Summary Or Omreport Servermodule Summary

Use the omreport system summary or omreport servermodule summarycommand to view a comprehensive summary of software and hardware components currently installed on the system. Type:
omreport system summary
or
omreport servermodule summary
  • NOTE: If the vFlash or SD card size is less than 1 GB, the size is displayed in MB.
  • NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC is installed, Server Administrator displays the USC version.

The output that is displayed in the CLI window depends on the systems management software, operating system, and hardware components and options installed on the system. The following partial command results are unique and may not resemble the hardware and software configuration of the system:

Table 1. Command results. This table lists the Command results
System Summary  
-----------------  
Software Profile  
-----------------  
Systems Management  
Name : Dell OpenManage Systems Management Software (64–Bit)
Version : x.x.x
Description : Systems Management Software
Contains Apache Tomcat Webserver x.x.x
  : Common Storage Module x.x.x
  : Data Engine x.x.x
  : Hardware Application Programming Interface x.x.x
  : Instrumentation Service x.x.x
  : Instrumentation Service Integration Layer x.x.x
  Intel SNMP Agent x.x.x
  : Inventory Collector x.x.x
  : OMACS x.x.x
  : Operating System Logging x.x.x
  : Oracle Java Runtime Environment x.x.x
  : Remote Access Controller Managed Node x.x.x
  : Server Administrator Common Framework x.x.x
  : Server Administrator Core files x.x.x
  : Server Administrator Instrumentation files x.x.x
  : Server Administrator Core files x.x.x
  : Server Instrumentation SNMP Module x.x.x
  : Server Instrumentation WMI Module x.x.x
  : Storage Management x.x.x
   
Operating System  
Name : Microsoft Windows Server 2008 R2, Enterprise x64 Edition
Version : Version 6.1 (Build 7601 : Service Pack 1) (x64) Server Full Installation
System Time : Fri May 20 18:02:52 2XXX
System Bootup Time : Wed May 18 18:37:58 2XXX
   
-------  
Server Module  
-------  
Information  
Host Name : WIN-GSFCCED6N2D
System Location : Please set the value
Model : PowerEdge FM120
Asset Tag SST,3,4,S
Service Tag CB2DX1S
Express Service Code 26790524560
Slot Number Slot =8
Slot Name SLOT-02
Form Factor 1U Half Width
Node Id CB2DX1Sc
   
Remote Access Information  
Remote Access Device : iDRAC7 Express
vFlash Media : Absent
   
Processor 1  
Processor Brand : Genuine Intel (R) CPU 4000 @ 2.41GHz
Processor Version : Model 77
Voltage : 1000 mV
   
Memory  
Total Installed Capacity :4096 MB
Memory Available to the OS :4096 MB
Total Maximum Capacity :32768 MB
Memory Array Count : 1
   
Memory Array 1  
Location : System Board or Motherboard
Use : System Memory
Installed Capacity : 4096 MB
Maximum Capacity : 32768 MB
Slots Available : 24
Slots Used : 1
ECC Type : Multibit ECC
   
BIOS Information  
Manufacturer : Dell Inc.
Version : 0.1.10
Release Date : 07/31/2013
   
Firmware Information  
Name : iDRAC7
Version : 1.50.50 (Build 3)
   
Firmware Information  
Name : Lifecycle Controller 2
Version : 1.3.0.518
   
---------------  
Remote Access Controller  
---------------  
Remote Access Controller Information  
Product : iDRAC7 Express
IP Address : 10.94.146.217
IP Subnet : 255.255.255.0
IP Gateway : 10.94.146.1
IPv6 Address 1 : ::
IPv6 Address 2 : ::
IPv6 Gateway : ::
   
---------------  
Network Data  
---------------  
Network Interface 0  
IP Address : xx.xx.xx.xx
Subnet Mask : xx.xx.xx.xx
Default Gateway : xx.xx.xx.xx
MAC Address : : xx-xx-xx-xx-xx-xx
   
Network Interface 1  
IP Address : xx.xx.xx.xx
Subnet Mask : xx.xx.xx.xx
Default Gateway : xx.xx.xx.xx
MAC Address : : xx-xx-xx-xx-xx-xx

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\