Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Components and events of platform events

The following table lists the components and the events for which you can set platform events. Components are listed in alphabetical order, except that warning events always precede failure events for a component.

Table 1. Valid Parameters Of Omconfig System Platformevents . The following table describes the event name such as alertsenable=true or false and the description of the event name.
Event Name Description
alertsenable=true | false

true: Enables generation of platform event filter alerts.

false: Disables generation of platform event filter alerts.

  • NOTE: This setting is independent of the individual platform event filter alert settings. For a platform event filter to generate an alert, both the individual alert and the global event alert are enabled.
event=batterywarn Sets action or enables or disables alert generation when a battery device detects that the battery is pending a failure condition.
event=batteryfail Sets action or enables or disables alert generation when a battery device detects that the battery has failed.
event=discretevolt Sets action or enables or disables alert generation when a discrete voltage probe detects that the voltage is too low for proper operation.
event=fanfail Sets action or enables or disables alert generation when a fan probe detects that the fan is running too slow or not at all.
event=hardwarelogfail Enables or disables alert generation when a hardware log detects a failure value.
event=intrusion Sets action or enables or disables alert generation when a chassis is opened.
event=powerwarn Sets action or enables or disables alert generation when a power device probe detects that the power supply, voltage regulator module, or DC to DC converter is pending a failure condition.
event=powerabsent Sets action or enables or disables alert generation when a processor probe detects that the power supply is absent.
event=powerfail Sets action or enables or disables alert generation when a power device probe detects that the power supply, voltage regulator module, or DC to DC converter has failed.
event=processorwarn Sets action or enables or disables alert generation when a processor probe detects that the processor is running at less than peak performance or speed.
event=processorfail Sets action or enables or disables alert generation when a processor probe detects that the processor has failed.
event=processorabsent Sets action or enables or disables alert generation when a processor probe detects that the processor is absent.
event=redundegrad Sets action or enables or disables alert generation when the system fans and/or power supplies become inoperative, resulting in less than full redundancy for that component.
event=redunlost Sets action or enables or disables alert generation when the system fans and/or power supplies become inoperative, resulting in a lost or a no redundant components working condition for that component.
event=systempowerwarn Sets actions when a power consumption probe detects a warning value.
event=systempowerfail Sets actions when a power consumption probe detects a failure value.
event=tempwarn Sets action or enables or disables alert generation when a temperature probe detects that the temperature is approaching the maximum high or low limits.
event=removableflashmediapresent Sets actions that Server Administrator performs when the system detects a removable flash media.
event=removableflashmediawarn Sets actions that Server Administrator performs when a removable flash media warning is displayed.
event=removableflashmediafail Sets actions that Server Administrator performs when a removable flash media fails.
event=tempfail Sets action or enables or disables alert generation when a temperature probe detects that the temperature is either too high or low for proper operation.
event=voltfail Sets action or enables or disables alert generation when a voltage probe detects that the voltage is too low for proper operation.
event=intdualsdcardcritical Sets actions that Server Administrator performs when an internal dual SD card critical event occurs.
event=intdualsdcardwarn Sets actions that Server Administrator performs when an internal dual SD card warning is displayed.
event=intdualsdcardabsent Sets actions that Server Administrator performs when an internal dual SD card is not available.
event=intdualsdcardredunlost Sets actions that Server Administrator performs when the redundancy of an internal dual SD card is lost.
event=watchdogasr Enables or disables alert generation configured by the ASR when the system has hung or is not responding.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\