跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

banner exec

Configure a message that is displayed when your enter EXEC mode.

Syntax

banner exec c line c

To delete a banner, use the no banner exec command.

Parameters

c	Enter the keywords `banner exec`, then enter a character delineator, represented here by the letter c. Press ENTER.
line	Enter a text string for your banner message ending the message with your delineator. In the following example, the delineator is a percent character (%); the banner message is “testing, testing”.

Defaults

No banner is displayed.

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.3(0.0)	Supported on the M I/O Aggregator.

Usage Information

After entering the banner login command, type one or more spaces and a delineator character. Enter the banner text then the second delineator character. When the user is connected to the router, if a message of the day banner is configured, it displays first. If no message of the day banner is configured, the login banner and prompt appear. After the user has logged in, the EXEC banner (if configured) displays.

Example

Dell(conf)#banner exec ?
                                             LINE c banner-text c, where 'c' is a delimiting character
                                             Dell(conf)#banner exec %
                                             Enter TEXT message. End with the character '%'.
                                             This is the banner%
                                             Dell(conf)#end
                                             Dell#exit
                                             4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on line
                                             console
                                             
                                             This is the banner
                                             
                                             Dell con0 now available
                                             
                                             Press RETURN to get started.
                                             4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line
                                             console
                                             This is the banner
                                             Dell>

Related Commands

banner login — sets a banner for login connections to the system.

exec-banner— enables the display of a text string when you enter EXEC mode.

line — enables and configures the console and virtual terminal lines to the system.