跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

enable password

Change the password for the enable command.

Syntax

enable password [level level] [ encryption-type] password

To delete a password, use the no enable password [ encryption-type] password [level level] command.

Parameters

level level

(OPTIONAL) Enter the keyword level then a number as the level of access. The range is from 1 to 15.

encryption-type

(OPTIONAL) Enter the number 7 or 0 as the encryption type.

Enter a 7 then a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Networking router.

Use this parameter only with a password that you copied from the show running-config file of another Dell Networking router.

password

Enter a text string, up to 32 characters long, as the clear text password.

Defaults

No password is configured. level = 15.

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To control access to command modes, use this command to define a password for a level and use the privilege level (CONFIGURATION mode) command.

Passwords must meet the following criteria:

Start with a letter, not a number.
Passwords can have a regular expression as the password. To create a password with a regular expression in it, use CNTL + v prior to entering regular expression. For example, to create the password abcd]e, you type “ abcd CNTL v ]e”. When the password is created, you do not use the CNTL + v key combination and enter “ abcd]e”.

NOTE: The question mark (?) and the tilde (~) are not supported characters.

Related Commands

show running-config — views the current configuration.

privilege level (CONFIGURATION mode) — controls access to the command modes within the switch.