跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

offline stack-unit

Place a stack unit in the offline state.

Syntax

offline stack-unit number

Parameters

number

Enter the stack-unit number. The range is from 0 to 5.

Defaults

none

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

While executing the offline stack unit CLI, the following warning message is displayed:

Dell#offline stack-unit 0
                                                Warning - offline of unit will bring down all the protocols and
                                                the unit will be operationally down, except for running Diagnostics.
                                                Please make sure that stacking/fanout not configured for Diagnostics execution.
                                                Also reboot/online command is necessary for normal operation after the offline command is issued.
                                                Proceed with Offline [confirm yes/no]:no
                                                Dell#

Make sure that stacking is not configured for Diagnostics execution. Also, reboot/online command is necessary for normal operation after the offline command is issued.